HONYPLAS® polyphenylsulfone (PPSU) is an amorphous material. Compared with PSU, it has improved impact resistance and hydrolysis resistance. The usual working temperature is about 170°C. After high temperature aging, it still maintains extremely high notched impact strength.
HONYPLAS® polyphenylsulfone (PPSU) has the highest performance among sulfone polymers, has better impact and chemical resistance than polysulfone (PSU) and polyetherimide (PEI), and has the highest performance among plastic materials Impact resistance and stress crack resistance, its Izod notch impact resistance is as high as 690J/m.
HONYPLAS® polyphenylsulfone (PPSU) has excellent long-term high temperature resistance (RTI up to 180°C) and excellent hydrolytic stability. It is an ideal choice for hot water fittings and medical device applications that require repeated steam sterilization. Unrestricted steam sterilization and excellent resistance to chlorinated hot water.
HONYPLAS® polyphenylsulfone (PPSU) Features
High strength and rigidity
Very high impact strength (the same at low temperatures)
Very high dimensional stability
Excellent chemical resistance
High resistance to various radiation
Excellent antibacterial ability
Compared with semi-crystalline materials, the chemical resistance is lower.
HONYPLAS® polyphenylsulfone (PPSU) Application
Microwave oven parts
Hair dryer
Humidifier
Food industry
Pump wheel
Insulator
Medical industry
PPSU - Polyphenylsulfone Ensinger TECASON P plastic
The PPSU semi-finished products produced by Ensinger usually use Radel® PPSU as the raw material, which can provide two forms of sheet and rod, which can be used for machining.
Properties and Specifications of PPSU Material
PPSU plastic has the following characteristics:
PPSU material series
The PPSU material forms that Ensinger can provide include:
Medical industry: test heads/adjusters for hip, knee and shoulder joints and handles for medical devices
TECASON P MT orange material is suitable for medical industry applications. In many medical applications, designers usually want to have a variety of colors to choose from to increase design flexibility
TECASON P MT black is a polyphenylsulfone material primarily intended for applications in the medical industry. Medical grade PPSU material has improved performance in terms of temperature, impact strength and chemical resistance, and has excellent resistance to repeated steam autoclaving - without any change in the material's dimensional stability or physical properties. Medical grade PPSU material is available in a variety of colors, and PPSU XRO material with X-ray visible XRO additives can be added to achieve clear part visibility on fluorescent inspection and X-ray. Materials produced by both product lines are tested according to ISO 10993. Information about USP Class VI of raw materials can also be provided
TECASON P MT blue material is suitable for medical applications. In many medical applications, designers often need to have many colors to choose from when making material selection decisions. The TECASON P MT blue material is just one of the many color options available in the range. For more details see TECASON P MT black material
TECASON P MT green material is suitable for medical applications. In many medical applications, designers often need to have many colors to choose from when making material selection decisions. The TECASON P MT green material is just one of the many color options available in the range. See TECASON P MT black material for more details.
TECASON P MT gray material is suitable for medical applications. In many medical applications, designers often need to have many colors to choose from when making material selection decisions. The TECASON P MT gray material is just one of the many color options available in the range. For more details see TECASON P MT black material
TECASON P MT ivory materials are suitable for medical applications. In many medical applications, designers often need to have many colors to choose from when making material selection decisions. The TECASON P MT ivory material is just one of the many color options available in the range. See TECASON P MT black material for more details.
TECASON P MT red material is suitable for medical applications. In many medical applications, designers often need to have many colors to choose from when making material selection decisions. TECASON P MT red material is just one of many color options in the range
TECASON P MT yellow material is suitable for medical applications. In many medical applications, designers often need to have many colors to choose from when making material selection decisions. The TECASON P MT yellow material is just one of the many color options in the range. See TECASON P MT black material for details
TECASON P MT XRO black is a specially developed X-ray visible and biocompatible PPSU (polyphenylsulfone) material. This line of materials allows us to meet the challenging requirements of minimally invasive and image-controlled surgery. It is made radio-opaque by adding a contrast agent to standard medical grade PPSU material. Machined parts made using it are clearly visible under fluoroscopy and x-rays. By using the material, surgical instruments and orthopedic implant trial heads are clearly imaged during image-controlled surgery. Medical grade PPSU materials have greatly improved in terms of temperature resistance, impact strength, and chemical resistance, and are very resistant to repeated steam high temperature sterilization (maintaining good dimensional stability and physical properties). TECASON P MT XRO material has passed the ISO 10993 test. As a medical grade material, it can be in contact with human body fluids, bone substances and dentin for no more than 24 hours, and has a variety of colors and sizes to choose from. Information about USP Class VI of raw materials is also available
TECASON P MT XRO blue has the excellent properties of PPSU material and is visible to X-rays. Typical applications for conventional medical grade PPSU materials include orthopedic test probes and other medical devices. By adding a certain amount of opacifying agent, this material is different from conventional materials, and parts machined with it can be seen under X-ray. TECASON P MT XRO products have many colors and sizes, for more information, see TECASON P MT XRO black material
TECASON P MT XRO green has the excellent performance of PPSU material and is visible to X-rays. Typical applications for conventional medical grade PPSU materials include orthopedic test probes and other medical devices. By adding a certain amount of opacifying agent, this material is different from conventional materials, and parts machined with it can be seen under X-ray. TECASON P MT XRO products have many colors and sizes, for more information, see TECASON P MT XRO black material
TECASON P MT XRO gray has the excellent properties of PPSU material and is visible to X-rays. Typical applications for conventional medical grade PPSU materials include orthopedic test probes and other medical devices. By adding a certain amount of opacifying agent, this material is different from conventional materials, and parts machined with it can be seen under X-ray. TECASON P MT XRO products have many colors and sizes, for more information, see TECASON P MT XRO black material
TECASON P MT XRO red has the excellent properties of PPSU material and is visible to X-rays. Typical applications for conventional medical grade PPSU materials include orthopedic test probes and other medical devices. By adding a certain amount of opacifying agent, this material is different from conventional materials, and parts machined with it can be seen under X-ray. TECASON P MT XRO products have many colors and sizes, for more information, see TECASON P MT XRO black material
TECASON P MT XRO yellow has the excellent properties of PPSU material and is visible to X-rays. Typical applications for conventional medical grade PPSU materials include orthopedic test probes and other medical devices. By adding a certain amount of opacifying agent, this material is different from conventional materials, and parts machined with it can be seen under X-ray. TECASON P MT XRO products have many colors and sizes, for more information, see TECASON P MT XRO black material
Ppsu Sheet,Ppsu Virgin Material Ppsu Sheet,Polyphenylsulfone Sheet Rod,Ppsu sheet rod,Polyphenylsulfone,PPSU Hony Engineering Plastics Limited , https://www.honyplastic.com
PPSU plastic is an amorphous material with a high glass transition temperature and low moisture absorption. In addition, PPSU material has better impact strength and chemical resistance than other polysulfone materials such as PSU and PES. In addition to these properties, PPSU materials are more resistant to hot steam sterilization than other polysulfone materials, and are resistant to detergents and disinfectants.
High service temperature (180°C)
good chemical compatibility
Excellent resistance to hydrolysis (suitable for repeated steam sterilization)
High stiffness at various temperatures
very high impact strength
high dimensional stability
Excellent resistance to high-energy radiation (gamma rays and X-rays)
good electrical insulation
Excellent dielectric properties
The corresponding product grade of PPSU Radel® material produced by Ensinger is TECASON P, including the following materials:
TECASON P - Industrial Grade
TECASON P MT - medical grade, biocompatible material, available in various colors
TECASON P MT XRO - medical grade, x-ray visible, biocompatible
PPSU bar
PPSU sheet
Radel® is a registered trademark of Solvay SA
TECASON P MT brown material is suitable for medical applications. In many medical applications, designers often need to have many colors to choose from when making material selection decisions. The TECASON P MT brown material is just one of the many color options available in the range. For more details see TECASON P MT black material
Precision Machined Brass Hexagonal Ring Lock Nut
Precision Machined Brass Hexagonal Ring Lock Nut
**Model No.:** Custom Made
**Finish:** Hot Galvanizing
**Description:** Hexagonal Ring Lock Nut
**Service:** OEM, ODM, Samples
**Shipping:** DHL, UPS, FedEx
**Lead Time:** 20 Days
**Minimum Order Quantity:** 1 PCS
**Trademark:** HKAA
**Specification:** ISO9001
**Origin:** China
**HS Code:** 7318160000
Our precision machined brass hexagonal ring lock nut is designed for high-performance applications. The surface finish can be customized based on your specific requirements. Available materials include steel, aluminum, brass, iron, zinc, and various alloys, with any additional material or dimension tailored to customer demand.
**Usage:** Ideal for machinery, furniture, toys, wood boards, and walls.
**Testing Equipment:** Projector
**Tolerance:** ±0.05 mm
We are committed to providing samples for quality and functional testing. As a certified company under ISO 9001:2008, we ensure the highest standards of production and service.
---
### Key Features:
- **14 Years of Experience**
- **Short Lead Time**
- **Excellent After-Sale Service**
- **Free Samples Provided**
### Materials:
Stainless steel, copper, brass, carbon steel, aluminum (as per customer requirement).
### Surface Treatments:
Zinc plating, nickel plating, chrome plating, tin plating, copper plating, oxygen resin spraying, heat treatment, hot-dip galvanizing, black oxide coating, painting, powder coating, color zinc plating, blue-black zinc plating, rust preventive oil, titanium alloy galvanizing, silver plating, plastic, electroplating, anodizing, and more.
### Main Products:
Precision screws, bolts, nuts, fasteners, knobs, pins, bushings, sleeves, gears, stamping parts, washers, gaskets, plastic injection molding parts, standoffs, CNC machining services, and accessories.
### Production Equipment:
CNC machines, automatic lathes, stamping machines, CNC milling machines, rolling machines, laser cutting, tag grinding machines, and more.
### Management System:
ISO 9001:2008
### Certifications:
RoHS, SGS, Material Certification
### Testing Equipment:
Projector, Salt Spray Test, Durometer, Coating Thickness Tester, 2D Projector
### Lead Time:
Typically 10–15 working days, depending on order quantity.
### Return Policy:
We handle returns for products with quality issues or deviations from drawings.
### Sample Delivery:
By DHL, FedEx, UPS, TNT, EMS.
### Warranty:
Replacement at our cost for rejected products.
### Markets:
Serving North America, South America, Eastern Europe, Western Europe, Northern Europe, Southern Europe, and Asia.
### How to Order:
1. You send us your drawing or sample.
2. We conduct a project assessment.
3. We provide our design for your confirmation.
4. We make the sample and send it after you confirm our design.
5. You confirm the sample, place an order, and pay a 30% deposit.
6. We start production.
7. Upon completion, you pay the balance after confirming pictures or tracking numbers.
8. Trade is completed – thank you!
### Applications:
Toys, automotive, instruments, electrical equipment, household appliances, furniture, mechanical equipment, daily living equipment, electronics, sports equipment, light industry products, sanitation machinery, hotel supplies, artware, and more.
Our commitment to quality, customization, and timely delivery makes us a trusted partner for global clients. Whether you need a small batch or large-scale production, we are here to meet your needs. Contact us today for a quote or sample!