Chemical Circulating Pump with Variable Speed Controlled

Brief Introduction
The YL Chemical Circulating Pump is widely used in various processes where its reliable low-shear flow characteristics make it ideal for transferring media such as chemical additives/agents, resins, and oils. We select the pump based on your medium's properties and technological requirements to ensure you get the best pump for your critical process, meeting both your and your customers' expectations.

Pump Applications
Petrochemicals: Thick oil, heavy oil, crude oil, bitumen, grease, lubricating oil, catalytic agents, and other viscous liquids.
Fine Chemicals: Dyes, pigments, chemical additives, adhesives, silicone oil, leather oil, colloidal materials, pulp, paint, ink, insulating paint, resin, solvents, etc.
Chemical Fibers: Pectic slurry, PVA, spandex slurry, vinylon slurry, acrylic slurry, polyester chips, terylene, polypropylene fiber, rayon, functional fibers, etc.

Pump Working Principle

The even rotation of the rotor pair creates a vacuum on the suction side of the pump, which is defined by the direction of rotation of the drive. This vacuum draws the liquid into the pump chamber. As the rotors continue to rotate, the pumped medium is conveyed past the pump wall into the pressure area. Up to six chamber charges are displaced with each drive rotation depending on the rotor type. When the rotor is at rest, the pump seals off almost completely.

Pump Structure

The complete pump consists of a bare shaft pump, coupling & shield, gear reducer with motor, and baseplate. You can only have our bare shaft pump.

Pump Specifications

Note*

2. Speed, flow rate, electrical power and pressure will be verified according to different liquid properties.

3. Port size can be changed as needed.

4. YL reserves the right to change specifications without

All Products

Guangdong Huate Gas Co., Ltd , https://www.huatehfc.com