Bronze Pump for Sea Water Application

Power: Electric
Start Up: Electric Pump
Type: Blade Pump
Application: Clarified Water Pump
Industry: Food Pumps
Media: Water
Performance: Anti-Corrosion
Theory: Centrifugal Pump
Casting Material: Bronze
Impeller Material: Bronze
Shaft Material: Bronze
Discharge Pressure: 0-50bar
Revolution: 2980/1450rpm
Inlet: φ32-φ200
Outlet: φ32-φ200
Weight: 50-2000 Kg
Rate: 5.5-500kw
Color: Random
Trademark: SOLID
Transport Package: Polywood
Specification: 3m3/h-500m3/h
Origin: China
HS Code: 8413104090
Thank you for you interest in our pumps, follow is brief introduction of this prodcut,welcome to contact us for any other technical information or latest price.

1. Brief introduction of Bronze Pump for Sea Water Application
 CIS single stage end suction centrifugal pump is for water or liquid similar to water. It's simple, reliable, small, light, and with good anti-cavitation performance, little power consumption and, it is easy to maintain. Product application: It applies to work in system of industry and city water supply & drainage, water supercharging of high rise building, park spray irrigation, water pressurize in fire control, remote water delivery, cycle refrigeration of heating and ventilation, circulatory supercharger of cold-warm water in bathroom, etc.


2. Structural characteristics of Bronze Pump for Sea Water Application
    CIS series pump is designed according to the performance and size stipulated by the national standard ISO2858, mainly composed of pump body (1), pump cover (2), impeller (3), shaft (4), seal ring (5), axle sleeve (8) and suspension bearing component (12).
The parts of the pump body and the pump cover of IS and IR pumps are dissecting from the back of the impeller, which is usually referred to as the rear door opening structure. It has the advantages of convenient maintenance, no pump body, suction pipeline, discharge pipe and motor, only remove the intermediate coupling of the long coupling, and then exit the rotor parts for maintenance.
The pump housing, namely pump body and pump cover, constitutes the pump's workroom, impeller, shaft and rolling bearing, etc. it is the rotor of the pump. The suspension bearing part supports the rotor parts of the pump, and the rolling bearing bears the radial and axial forces of the pump.
In order to balance the axial force of the pump, most of the pumps have a seal ring before and after the impeller, and there is a balance hole on the rear cover plate of the impeller. Because some pumps have little axial force, there is no seal ring and balance holes on the back of the impeller.
Bronze Pump for Sea Water Application 1 pump body
2 pump cover
3 impeller
4 axle
5 seal ring
6 impeller nut
7 stop washer
8 axle sleeve
9 stuffing cover
10 packing ring
11 packing
12 suspension bearing parts.
 
3. The Application of Bronze Pump for Sea Water Application
  1. Industry and the city water supply and drainage,
  2. High-rise building pressurized water,
  3. Garden irrigation,
  4. Fire booster,
  5. Long-distance water transfer,
  6. Heating,
  7. Bathroom pressurization of cold and hot water circulation equipment,
  8. Especially suitable for boiler.

4. Advantages of Bronze Pump for Sea Water Application
  1. Advanced hydraulic model, high efficiency, wide range of performance.
  2. Pump running smoothly,
  3. Low noise.
  4. Seal with soft packing seal or mechanical seal, sealing safety and reliability, simple structure, easy maintenance.
  5. Shaft is a fully sealed structure, to ensure that no contact with the media, not rust, long service life.
 
5. Part of the parameters table of Bronze Pump for Sea Water Application
Model Speed Capacity Head Efficiency Power(KW) NPSHr Weight
  m3/h L/S   (%) Shaft power Motor    
(r/min) (m) IS IH IS IH power (m) (kg)
50-32-125 2900 7.5 2.08 22 47 43 0.96 1.09 2.2 2 32.5
12.5 3.47 20 60 51 1.13 1.33 2
15 4.17 18.5 60 49 1.26 1.5 2.5
1450 3.75 1.04 5.4 43 36 0.13 0.16 0.55 2
6.3 1.74 5 54 45 0.16 0.19 2
7.5 2.08 4.6 55 44 0.17 0.21 2.5
50-32-200B 2900 10.8 3 38 44 37 2.54 3.1 4 2 46
1450 5.4 1.5 9.5 38 31 0.37 0.47 0.75
65-50-125 2900 15 4.17 21.8 58 17 1.54 1.85 3 2 38
25 6.94 20 69 62 1.97 2.2 2
30 8.33 18.5 68 63 2.22 2.4 2.5
1450 7.5 2.08 5.35 53 44 0.21 0.25 0.55 2
12.5 3.47 5 64 57 0.27 0.31 2
15 4.17 4.7 65 59 0.3 0.33 2.5
65-50-125A 2900 22.4 6.22 16 67 61 1.46 1.69 2.2 2 38
1450 11.2 3.11 4 62 54 0.2 0.24 0.55
65-50-160 2900 15 4.17 35 54 44 2.65 3.18 5.5 2 40
25 6.94 32 65 57 3.35 3.82 2
30 8.33 30 66 59 3.71 4.15 2.5
1450 7.5 2.08 8.8 50 Tongxing mainly focus on providing Commercial Refrigeration parts for commercial refrigeration equipment manufacturers ( beverage machine, commercial refrigerator,display cae , ice maker, ice cream machine.. ) for over 20 years.  "To let all world's refrigeration equipments has Tongxing's parts ." Tongxing never stops its step in moving forward, from OEM service to provide costomer lower cost products with high quality , to R&D ability to provide full service including design-development-production, are all what we are going to is to be an expert in commercial refrigeration area.   

Microchannel Heat Exchanger

Microchannel Heat Exchanger,Aluminium Microchannel Heat Exchanger,Stainless Steel Microchannel Heat Exchanger,Microchannel Heat Exchanger

Zhejiang Tongxing Technology Co., Ltd. , https://www.txheatexchanger.com