Nickel Alloy Forged Fitting Union B725 Uns N04400, Monel 400

Model NO.: SS Forged Fitting Union
  Product Type:
        Full coupling, Half coupling, Reducing coupling, Reducer insert, Union, 90° elbow, 45° elbow, Tee, Cross, Cap, Square head plug, Hex head plug, Round head plug, Hex head bushing, Union, Reducing swage, Welding Boss, Mitre Boss, High Pressure Boss, Socket Reducing Insert.
 
Size:
       1/2" to 4" (DN15~DN100)
 
Range(Wall Thickness):

        3000LB to 9000LB
        XS, Sch80, Sch160, XXS.
 
Standard:

        ASME/ANSI B16.11, MSS SP-79, MSS SP-83, MSS SP-95, MSS SP-114, JIS B2316, JIS B2302 etc.
 
Material:

        Stainless steel, Duplex steel, Alloy steel, Carbon Steel, Low-temperature steel, Nonferrous metal (Nickel Alloy, Aluminum Alloy, Titanium Alloy, etc.)
 
+ SOCKET WELD FITTINGS

        A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a valve, fitting or flange. Unlike butt-weld fittings, socket weld fittings are mainly used for small pipe diameters (Small Bore Piping), typically for piping with nominal diameter NPS 2 or smaller.

        Fillet-type seal welds are used to join the pipe to valves, fittings, or other sections of pipe. Socket-welded joints are ideal when high leakage integrity and structural strength are critical design factors.
        While fatigue resistance is lower compared to butt-welded construction due to fillet welds and abrupt geometry, it still outperforms most mechanical joining methods.
        SW Fittings are a family of high-pressure fittings widely used in various industrial applications.
 
Types of Threaded Fittings by Class and Size
Description
Class Designation
 
3000 6000 9000
Elbows 45 and 90 degrees, Tees, Crosses, Couplings, Half-Couplings, End or Pipe Caps 1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Size by Wall Thickness SCH 80 / XS SCH 160 XXS
Plugs and Bushings are not identified. They may be used up through Class 6000 NPS.

+THREADED FITTINGS

        Threaded joints are one of the oldest methods of connecting piping systems. Like socket weld fittings, they are commonly used for small pipe diameters (Small Bore Piping), typically for pipes with nominal diameter NPS 2 or smaller.

Types of Threaded Fittings by Class and Size
Description

Class Designation
2000 3000 6000
Elbows 45 and 90 degrees, Tees, Crosses, Coupling, Half-Coupling, Cap 1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Wall SCH 80 / XS SCH 160 XXS
Plugs and Bushings are not identified. They may be used up through Class 6000.  

Polyester Acrylate Oligomer

Polyester Acrylate Oligomer,,Polyester Oligomer,Polyester

Runhe Chemical (Guangzhou) Co.,Ltd. , https://www.rhchems.com