Nickel Alloy Forged Fitting Union B725 Uns N04400, Monel 400

Model NO.: SS Forged Fitting Union
  Product Type:
        Full coupling, Half coupling, Reducing coupling, Reducer insert, Union, 90° elbow, 45° elbow, Tee, Cross, Cap, Square head plug, Hex head plug, Round head plug, Hex head bushing, Union, Reducing swage, Welding Boss, Mitre Boss, High Pressure Boss, Socket Reducing Insert.
 
Size:
       1/2" to 4" (DN15~DN100)
 
Range(Wall Thickness):

        3000LB to 9000LB
        XS, Sch80, Sch160, XXS.
 
Standard:

        ASME/ANSI B16.11, MSS SP-79, MSS SP-83, MSS SP-95, MSS SP-114, JIS B2316, JIS B2302 etc.
 
Material:

        Stainless steel, Duplex steel, Alloy steel, Carbon steel, Low-temperature steel, Nonferrous metal (Nickel alloy, Aluminum alloy, Titanium alloy, etc.)
 
+ SOCKET WELD FITTINGS

Socket weld fittings are commonly used in small bore piping systems, typically for pipe sizes up to NPS 2. These fittings feature a recessed area where the pipe is inserted and then welded using a fillet weld. They offer high leakage integrity and strong structural performance, making them ideal for high-pressure applications. However, due to the use of fillet welds and abrupt geometry, their fatigue resistance is lower than that of butt-welded joints. Still, they provide better performance than most mechanical joining methods.

SW fittings are widely used in various industrial processes, especially in environments where high pressure and tight sealing are required. They come in different types such as elbows, tees, couplings, caps, and reducers.
These fittings are available in multiple classes and sizes, with options for varying wall thicknesses like SCH 80, SCH 160, and XXS.
 
Types of Threaded Fittings by Class and Size
Description
Class Designation
 
3000 6000 9000
Elbows 45 and 90 degrees, Tees, Crosses, Couplings, Half-Couplings, End or Pipe Caps 1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Size by Wall Thickness SCH 80 / XS SCH 160 XXS
Plugs and Bushings are not identified. They may be used up through Class 6000 NPS.

+THREADED FITTINGS

Threaded joints are one of the oldest methods for connecting piping systems. Like socket weld fittings, they are primarily used for small pipe diameters (Small Bore Piping), generally for piping with a nominal diameter of NPS 2 or smaller. They are easy to install and maintain, but require careful attention to thread quality and sealing to prevent leaks.

Types of Threaded Fittings by Class and Size
Description

Class Designation
2000 3000 6000
Elbows 45 and 90 degrees, Tees, Crosses, Coupling, Half-Coupling, Cap 1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Wall SCH 80 / XS SCH 160 XXS
Plugs and Bushings are not identified. They may be used up through Class 6000.

Tetrafunctional Monomer

Acrylate,Biomass-based Acrylate,Dipentaerythritol Hexaacrylate

Runhe Chemical (Guangzhou) Co.,Ltd. , https://www.rhchems.com