Ce Approved Auto Spray Paint Booth & Car Painting Room

Model NO.: SB-200
Heating Mode: Diesel
Paint Mist Treatment: Dry-type
Condition: New
Usage: Car and SUV Painting and Baking
Heating System: Riello Brand G20 Diesel Burner
Air Flow: 24000m3/H
Warranty: 12 Months
Types: Car Spray Booth
Trademark: EMPIRE
Transport Package: Polyfoam and Carton,One Set in a 20FT Container,3
Specification: 7000*5200*3500mm
Origin: China
HS Code: 84198990
Model NO.: SB-200
Heating Mode: Diesel
Paint Mist Treatment: Dry-type
Condition: New
Usage: Car and SUV Painting and Baking
Heating System: Riello Brand G20 Diesel Burner
Air Flow: 24000m3/H
Warranty: 12 Months
Types: Car Spray Booth
Trademark: EMPIRE
Transport Package: Polyfoam and Carton,One Set in a 20FT Container,3
Specification: 7000*5200*3500mm
Origin: China
HS Code: 84198990
SB-200 EMPIRE Spray Booth(CE Approved) 
 
Ce Approved Auto Spray Paint Booth & Car Painting Room
Ce Approved Auto Spray Paint Booth & Car Painting RoomCe Approved Auto Spray Paint Booth & Car Painting Room
Ce Approved Auto Spray Paint Booth & Car Painting RoomCe Approved Auto Spray Paint Booth & Car Painting Room
SB-200 Specification Datails
Dimension Length(mm) Width(mm) Height(mm)
Booth Outside 7000mm 5200mm 3500mm
Booth Inside 6900mm 3900mm 2750mm
Cabin System Wallboard Fire-retardant composite molding Sandwich style EPS(epispastics polystyrene) (Rock wool and PU are optional )50mm thickness, EPS foam Density is 14kg/m³ ; The colorful steel skin boards have been HDG(hot dip galvanizing),service life can reach 20 years without rusting. It keeps high insulationperformance. Four colors for your choice, including blue, red, orange and white. High quality galvanized steel roof panel.
Basement 300mm high powder coating galvanized steel sheet and square steel pipe construction. 3 row of checked plate and 2 row of grids ,anti-rust and strong. The bearing capacity of driving grids up to 1000 kg per wheel; Basement frame is assembly formed by antirust steel square tube, the overall performance is good and strong. Two powder coating ramps.
Door 3 pieces of aluminum front doors. Size: 3000(w)*2750(h). 1 piece of emergency door.
Air Circulation System Intake Fan 2x4kw intake fan. BELIMO 20N electric damper. Siemens technology production, large air volume and low noise. Air flow: 24,000m3/h. The wire core of our fans is full cooper so our fans are very durable.
Exhaust Fan 1x5.5kw exhaust fan. Multi-layer fiberglass filter. Siemens technology production, large air volume and low noise. Air flow: 15,500m3/h.
Air Pipe Made of Galvanized steel sheet consisted of 4 pieces of straight pipe750*750*1000, and 1piece of elbow.
Filtering Multilayer filtering structure. The primary filter can capture granules larger than10μm. Ceiling filter capture granules bigger than 5μm. The floor filter and filter beside exhaust fan can capture paint and dust emission when painting. The air cleanliness in the working environment can reach 98%.
Heating System Burner Original Italy RIELLO G20 diesel burner, 200,000Kcal/h. The heating time 5-7min(20-60°C) Max temperature at 80°C. Fuel consumption is 4-5kg/ vehicle.
Heat Exchanger Big heat exchanger with two layers. Made of stainless steel. The heat exchange rate can reach 85%. Two layers to make our heating system safer and get higher heat exchange rate. What is more, we make two wings to make the temperature rise more quickly and save energy. 
Air make up cabinet The surface plate is powder coated galvanized plate, antirust, strong and beautiful;The frame is treated by hot-dip, antirust and strong, more durable than ordinary surface treatment, more beautiful, nodes with no damage spot, rigidity.
Oil tank support Tank carefully made of high quality steel, the powder coated treatment, beautiful and durable.  
Fume pipe Fume pipe made of galvanized pipe, diameter of 190mm, 4 pieces of 1000mm long straight pipe, two 90 ° elbows.  
LED Lighting System  Ceiling Light: 8*4=32pcs, 40w each, with light fixtures, anti-explosion design. CE approved
Side Light: 8*4=32pcs, 40w each, with light fixtures, anti-explosion design. CE approved
Control system   Control panel  Microcomputer control system
Function 

Painting, constant temperature painting , drying, lighting, painting time and drying time setting;
emergency stop switch, failure indication etc,especially with over-temperature and over-pressure alarm device. The electricity will be cut off once alarm devices alert. It makes our booth very safe.
**Include All Hardwarew, Fasteners, and Sealants.

When you need a spray booth or some similiar products,
Please contact with me without hesitate.
Welcome to visit our factory!

Sale Manager: Lynn Ding
 
Tel: +86 535 624 1918
 
SB-200 EMPIRE Spray Booth(CE Approved) 
 
Ce Approved Auto Spray Paint Booth & Car Painting Room
Ce Approved Auto Spray Paint Booth & Car Painting RoomCe Approved Auto Spray Paint Booth & Car Painting Room
Ce Approved Auto Spray Paint Booth & Car Painting RoomCe Approved Auto Spray Paint Booth & Car Painting Room
SB-200 Specification Datails
Dimension Length(mm) Width(mm) Height(mm)
Booth Outside 7000mm 5200mm 3500mm
Booth Inside 6900mm 3900mm 2750mm
Cabin System Wallboard Fire-retardant composite molding Sandwich style EPS(epispastics polystyrene) (Rock wool and PU are optional )50mm thickness, EPS foam Density is 14kg/m³ ; The colorful steel skin boards have been HDG(hot dip galvanizing),service life can reach 20 years without rusting. It keeps high insulationperformance. Four colors for your choice, including blue, red, orange and white. High quality galvanized steel roof panel.
Basement 300mm high powder coating galvanized steel sheet and square steel pipe construction. 3 row of checked plate and 2 row of grids ,anti-rust and strong. The bearing capacity of driving grids up to 1000 kg per wheel; Basement frame is assembly formed by antirust steel square tube, the overall performance is good and strong. Two powder coating ramps.
Door 3 pieces of aluminum front doors. Size: 3000(w)*2750(h). 1 piece of emergency door.
Air Circulation System Intake Fan 2x4kw intake fan. BELIMO 20N electric damper. Siemens technology production, large air volume and low noise. Air flow: 24,000m3/h. The wire core of our fans is full cooper so our fans are very durable.
Exhaust Fan 1x5.5kw exhaust fan. Multi-layer fiberglass filter. Siemens technology production, large air volume and low noise. Air flow: 15,500m3/h.
Air Pipe Made of Galvanized steel sheet consisted of 4 pieces of straight pipe750*750*1000, and 1piece of elbow.
Filtering Multilayer filtering structure. The primary filter can capture granules larger than10μm. Ceiling filter capture granules bigger than 5μm. The floor filter and filter beside exhaust fan can capture paint and dust emission when painting. The air cleanliness in the working environment can reach 98%.
Heating System Burner Original Italy RIELLO G20 diesel burner, 200,000Kcal/h. The heating time 5-7min(20-60°C) Max temperature at 80°C. Fuel consumption is 4-5kg/ vehicle.
Heat Exchanger Big heat exchanger with two layers. Made of stainless steel. The heat exchange rate can reach 85%. Two layers to make our heating system safer and get higher heat exchange rate. What is more, we make two wings to make the temperature rise more quickly and save energy. 
Air make up cabinet The surface plate is powder coated galvanized plate, antirust, strong and beautiful;The frame is treated by hot-dip, antirust and strong, more durable than ordinary surface treatment, more beautiful, nodes with no damage spot, rigidity.
Oil tank support Tank carefully made of high quality steel, the powder coated treatment, beautiful and durable.  
Fume pipe Fume pipe made of galvanized pipe, diameter of 190mm, 4 pieces of 1000mm long straight pipe, two 90 ° elbows.  
LED Lighting System  Ceiling Light: 8*4=32pcs, 40w each, with light fixtures, anti-explosion design. CE approved
Side Light: 8*4=32pcs, 40w each, with light fixtures, anti-explosion design. CE approved
Control system   Control panel  Microcomputer control system
Function 

Painting, constant temperature painting , drying, lighting, painting time and drying time setting;
emergency stop switch, failure indication etc,especially with over-temperature and over-pressure alarm device. The electricity will be cut off once alarm devices alert. It makes our booth very safe.
**Include All Hardwarew, Fasteners, and Sealants.

When you need a spray booth or some similiar products,
Please contact with me without hesitate.
Welcome to visit our factory!

Sale Manager: Lynn Ding
 
Tel: +86 535 624 1918
 

SLA-Stereo Lithography Appearance technology, using photosensitive resin 3-D printing materials: milky white texture, good strength, but relatively small toughness, small and thin brittle fracture, but easy to grind, electroplating, painting and coloring. Photosensitive resin is composed of two parts, namely photoinitiator and resin (resin consists of prepolymer, diluent and a small amount of additives). The amount of photoinitiator and diluent has an important influence on the curing speed and quality of photosensitive resin. When the proportion of photoinitiator and diluent is appropriate, not only the curing speed is fast, but also the curing quality is good. Therefore, in order to select large brand manufacturers, mature and stable photosensitive resin 3D Printing materials are very important. In terms of performance, there are also some imported photosensitive resin materials with high strength, transparency, high temperature resistance, moisture resistance and waterproof functions. In addition, three-dimensional printing materials of composite ceramics, such as alumina (AI2O3) m zirconia (ZRO2), hydroxyapatite (HAP), tricalcium phosphate (TCP) and so on, which are similar to high-resolution ceramic powder and photosensitive resin, can be selected. 


SLS-Selective Laser Sintering technology, using 3D printing materials: PA Series Nylon 3D Printing Material: Abrasion Resistance, High Strength and Stiffness, Good Chemical Resistance, Excellent Long-term Invariant Behavior, High Selectivity and Detailed Analysis, Biocompatibility in accordance with EN ISO 10993-1 and USP, and in accordance with EU Plastics Directive approved for food contact. Typical applications of this material are the highest quality of fully functional plastic parts. But the surface is relatively rough. There are also PA3200GF nylon fiberglass materials for deep drawing dies or any other applications requiring specific stiffness, high thermal deformation temperature and low wear; typically used in aluminium-filled nylon materials for metallic appearance and thermal load parts. At present, desktop LS laser sintering PA12 nylon powder material is also an option. 


SLM Selective Laser Melting technology,Under the irradiation of high density laser energy, metal powders can be completely melted. After cooling, they can be shaped and welded. It is through this process that SLM technology forms the 3d model layer by layer.SLM technology can print stainless steel, die steel, cobalt chromium alloy, titanium alloy, aluminum alloy, copper alloy, nickel base alloy powder, etc.It can print metal parts with complex structure to help shorten product development cycle and reduce R & D cost.

3D Printing


3D Printing

3D Printing,Electric Tool,Rapid Prototype,3D Printing Stereolithography

Ningbo Expert Mould Plastic Co., Ltd. , https://www.prototypesmaker.com