Cutting Material: Cr12MoV, Heat treatment
Cutting type: Hydraulic / Mechanical controlling cutting
Total motor power: 18.5 KW
Forming Power: 7.5KW Bending Power: 4.0KW
Cutting Power: 4.0KW Conical Power: 3.0 KW
Material of rollers: 45# steel, quenched HRC 58-62
Material of shafts: 45# steel, adjusted
Step of rollers: 13+1
Applicable Span: 5m~28m
The depth of the groove: 175 mm
Operating factor of the panel: 70 %
Thickness of the Panel: 0.8-1.5mm
Working Speed:
Straight Sheet: 15m/minb
Arch Sheet: 13m/min
Seaming: 6m/min
Electric Standard: 380V / 50 HZ / 3 PHASES or according to your requirement
Controlling system: PLC
Large Span Arch Machine, Span Machine, Span Arch Machine Botou Xianfa Roll Forming Machine Factory , https://www.rollforming.nl
MES recently introduced a new device, the ES-C3 device, which reduces emissions from ships. After installation of the device, the ship's exhaust emissions can meet the requirements of Regulation VI of the Convention on the Prevention of Marine Pollution of Ships. The unit is suitable for marine engines with a power range of 100 to 100,000 kW. After installation of the device, the ship's sulfur oxide emissions can be reduced by 90%.
New ship exhaust system