Recently, it was learned that the implementation rules of the "Regulations on the Management of Defective Automobile Products Recall" will be released in the near future, and the full text of the implementation rules is expected to be seen before the end of the year. However, according to informed sources, in the forthcoming implementation rules, the contents of the tire recall are missing, and the rules do not recall the tires for further refinement. It is understood that tires are the only auto parts listed separately in the Regulations on the Recall of Defective Automobile Products. Article 27 of the Regulations is the Tire Recall Regulations. The drafters of the implementation rules had hoped to write in the contents of the tire recall, but due to various difficulties, they failed to do so. It is learned that in the United States, tires are uniformly classified into equipment categories. In the relevant regulations, when referring to automobile manufacturers, equipment manufacturers are mentioned at the same time. However, in Chinese regulations, it is sometimes confusing to mention car manufacturers and sometimes replace tire manufacturers. The above-mentioned person said: "It is quite difficult to write the whole vehicle and the replacement tire into the implementation rules at the same time. It seems that this problem is only left behind, when the AQSIQ further develops some normative documents. Then, how to supervise the replacement of tires. A person from the AQSIQ Defective Product Management Center said: "In fact, the tire recall and the car will not be much different. It is nothing more than writing some principles into the specific operating procedures for replacing the tires." Article 27 of the Regulations on the Recall of Defective Automobile Products stipulates that if the tires of the automobile products that are not equipped with the vehicle are defective at the time of delivery, the producer of the tires shall be responsible for the recall. The specific measures shall be formulated by the product quality supervision department of the State Council with reference to the regulations.
Description
REY (Q) oil/gas fired hot air stove
adopts vertical return multi-layer structure. The hot air temperature can reach
600℃. This hot air furnace
is particularly suitable for metallurgy, chemical industry, ceramic, forage
production, etc.
Application
REY (Q) oil/gas fired hot air stove
is extensively used in food, medicine, farm and sideline products and various
material of drying, printing and dyeing, and so on. This hot air furnace can also be used for
drying, curing and heat setting for grain processing, wood processing,
automotive industry, etc.
Features
1. Oil/gas
fired hot air stove can use diesel oil, light oil, heavy oil, natural
gas or coal gas as fuel.
2. This hot air furnace uses pure hot air as the medium, so
there is no pollution.
3. It is featured with lower power consumption
and higher thermal efficiency.
4. This equipment can realize automatic measuring temperature and displaying.
Oil Hot Air Stove,Fuel Stove,Gas Stove,Gas Hot Air Stove Jiangsu Yutong Drying Engineering Co.,Ltd , https://www.ytdryer.com
·The tires are not included in the defective car recall implementation rules