Many people do not pay attention to the problem of how to tie the seat belt correctly. Even some people will never wear a seat belt when driving. In fact, this is a very terrible thing. From the data point of view, the correct seatbelt can be caused Can 45% of life be saved in a life-threatening accident, but what do you say more about it? Correctly fasten the seat belt first step - adjust sitting posture 1. The distance between the person and the steering wheel: Stretch out his hands and place the two hands on the steering wheel. This is the most suitable distance. 2. The degree of leg bending: The legs are bent about 90 degrees, so that if the emergency brake, the leg more flexible response. When a crash occurs, it also ensures sufficient cushioning of the legs to avoid cross-sections and The upper body is hurt. 3. Position of both hands on the steering wheel: Position both hands at 9 o'clock and 3 o'clock approximately horizontally to help control the vehicle effectively in an emergency. Correctly fasten your seat belts - Adjust your seat belts 1. Hold the buckle lock and tongue 2. Slowly pull out the lumbar shoulder harness 3. Make sure the shoulder belt is crossed from the shoulder and close to the neck, and it is comfortable and close to the body 4. Ensure that the waist belt is below the abdomen and as low as possible, also fitting to the body 5. Insert the seat belt buckle into the buckle until you hear the kata sound. Tips: The correct steps for pregnant women to wear seat belts: 1. The waist belt avoids the uplift position and is placed at the lowest position of the sacrum, which is the junction of the protruding parts of both sacrum and the pubis. It is best to tie your thighs. Do not let the belt cross over the raised belly. 2. The shoulder strap should also avoid the bulging tummy, from the side of the head through the breasts to the side of the abdomen. Do not allow the straps to cross the stomach, and be careful that the side of the head may rub against the neck. 3. Adjust the position of the seat when driving, so that there is a certain space between the stomach and the steering wheel. 4. Adjust the tilt of the seat so that the seat belt is always attached to the body.
DSA-2 Spinning Reel Series
5.2:1 or 6.2:1high speed gear system Stainless
steel Screw-in Handle for easy installation and removal
Dsa-2 Spinning Reel Series,Reel Fish Mats,Automatic Fishing Reel,Telescopic Fishing Rod And Reel CIXI DONGSHANG FISHING TACKLE CO.,LTD. , https://www.dongshangreels.com
Front drag
Thick bail arm
Super strong drive gear
Hight intensity graphite material
Micro-adjusting drag system
Excellent line lay osciallation system
one-way clutch ball bearing
gear ratio of 5.2:1 or 6.2:1 is available
Screw-in handle
Gear Ratio
5.2:1
6.2:1
Bearings
3+1
12+1
ITEM
Gear Ratio
Ball Bearing
Line Capacity(mm/m;Lbs/yds)-Standard
Line Capacity(mm/m)-Shwallow
OWC
DSA1000
5.2:1
3+1BB-10+1BB
0.18/205 0.20/170 0.25/100; 4/175 6/110 8/90
0.12/150
Y
DSA2000
6.2:1/5.2:1
3+1BB-10+1BB
0.20/245 0.23/180 0.28/115; 4/240 6/160 8/125
0.20/150
Y
DSA3000
6.2:1/5.2:1
3+1BB-10+1BB
0.28/155 0.31/125 0.36/95; 8/180 10/150 12/110
0.22/150
Y
DSA4000
6.2:1/5.2:1
3+1BB-10+1BB
0.28/225 0.31/180 0.36/135; 8/270 10/220 12/160
0.24/150
Y
The correct use of seat belts
Every day you drive, you are concerned about the safety belt that has been with you all the time. Although one of the things you must do every day on the car is to wear a seatbelt, but are you doing it right?