Trough feeder

The structure of the trough feeder is relatively simple, as shown in the figure below. It can be installed either on the ground or at the discharge opening of the silo. The bottom of the trough feeder is 20 to 60 times per minute and the stroke is 20 to 200 mm. The stroke can be properly adjusted by the eccentric of the drive, with the eccentricity being half of the stroke. According to certain beneficiation plant practice, when dealing with viscous ore, eccentricity is preferably not less than 50 mm. The width of the trough feeder tank is about 2 to 2.5 times the maximum feed size. The trough feeder has been used to meet the ore feeding of granular ore below 500 mm, but the most commonly used one is 9180×1240 mm, and its ore feeding size is 350~0 mm, which is broken as 400×600 颚. machine feeding equipment is suitable.

(1) Calculation of the production volume of the trough feeder
Q t =120K 1 B hn Rγ (1)
Where Q t ———production quantity, t/h;
K 1 ——— full coefficient, K 1 =0.8;
B———slot width, m;
h———layer thickness, m;
n———rushing times, times/min;
R———eccentric distance, m;
γ———the bulk density of the material, t/m 3 .[next]
(2) Power calculation of trough feeder
(1) Material gravity in the tank:
Fg=1000B h LYg (2)
Where F g ——— material gravity, N;
B———the width of the trough, m;
h———layer height, m;
L———the length of the trough, m;
Γ—the loose density of the material, t/m 3 ;
g———gravitational acceleration, g=9.81m/s 2 ;
(2) Column gravity:
F p =σ 1 b l (3)
Where F p ———grain gravity, N;
b———the width of the discharge opening or the connection funnel of the silo, m;
l———The length of the discharge port of the silo or the length of the connecting funnel, m;
σ 1 ———Guo Gui pressure;
(3) When the bottom plate retreats, the friction between the material and the bottom plate:
F= Æ’ (F g +F p ) (4)
Where F———friction, N;
ƒ ———The friction coefficient of the bottom plate and the material ƒ =0.4~0.7.
(4) Maximum speed of the bottom plate:

Where M———motor power, kW;
F———friction, N;
υ———Maximum speed of the bottom plate, m/s;
K 2 ——— the resistance coefficient of the bottom plate, the supporting wheel, the eccentric wheel, etc.;
η——— Transmission efficiency.

Gantry Crane can be a Single Girder Gantry Crane, Double Girder Gantry Crane, Rtg Crane or project gantry cranes with capacity 1t - 900t. Gantry cranes are usually employed to handle project materials, bulk material, containers, etc at outdoor working site, container yard, shipbuilding yard, bulking material site, road construction site, etc.


Rail-Mounted-Gantry-Crane


Features of Gantry Crane:


1. Box type girder, weld structure, large working space, and convenient installation and maintenance;

3. Components is of standardization, seriation and generalization;

4. Power supply can be from cable reel (left and right) and conductor bar( left and right);

5. Broad view of cab, equipped the internal linkage control console, flexible and comfortable operation, install of fan, heater, cooler, air-conditions and intercom  according to the customers' requirements;

6. Customized lift height, span, power supply, operation (pendant, cabin) and gantry crane structure (girder, supporting legs, cantilever).


Container-Gantry-Crane


Main Data of Gantry Crane:

Capacity: 1t - 900t or custom

Lift Height: 6m - 40m or custom

Span: 6m - 70m or custom

Work Duty: A4, A5, A6,A7or custom


Weihua provide professional gantry crane solutions, customized cranes, Crane Components, installation, after sale service. Weihua products export to 110 countries such as Russia, Thailand, Malaysia, Egypt, Saudi Arabia, Parkistan, the Philippines, Mexico, etc. Our success comes from customers' success. Welcome to visit Weihua.


Beam-Lift-Gantry-Crane


Gantry-Crane



Rtg-Crane

Gantry Crane

Goliath Crane,Gantry Crane,Rubber Tyred Gantry Crane,Light Gantry Crane

Henan Weihua Heavy Machinery Co., Ltd. , https://www.weihuacranefactory.com