City darling, Case CX75sr

When shopping, people tend to think that the bigger the better, but in urban work, the choice of excavator is not the bigger the better, to be able to shuttle freely in the city while meeting the work intensity, CX75sr not only has control and power Performance, low noise interference, but also change the "big butt" of the excavator, small and exquisite, good at "road fighting" to meet your city's driving interest.

Case CX75sr

Short and fine, the real strength!

"It can't be hydrolyzed too far," and it's the same in urban work. If you have a big skill, you can't open the alley, you can't go to the tunnel, you can't open the earth, and it's useless.

The tailless design makes the CX75SR's swivel space only 2.85m, and the track width is only 2.32m. If the extended space of the large and small arms is not counted, the 3m diameter work surface will be enough for the CX75SR to display. Compared with the walking speed of the same tons of equipment, the walking speed of the CX75SR has reached 5.1/3.3 (km/h), and the lifting speed is above 10%. It will have amazing performance in frequent short-distance displacement or moving operations.

With a small body and great energy, the CX75sr makes the most of this sentence. The 40kW Isuzu engine can provide a maximum torque of 210N·m (1500 rpm). The fully computer controlled Case precision hydraulic control system distributes the power output reasonably. It is reflected in the terminal, that is, the arm digging force is 41kN, and the bucket digging force is 60kN, which is more abundant than the common 75 model 38/56kN.

Case CX75sr parameters

At the same time, CX75sr comes standard with 3.87m standard boom. The maximum digging radius of the stop surface is 6390mm, the maximum excavation depth is 4140mm, the maximum unloading height is 5250mm, and the maximum excavation height is 7330mm. These indicators will exceed the same level of small excavation 100~300mm. The bucket capacity of the CX75sr comes standard from 0.28 to 0.40 (m3) and exceeds the standard for common models from 0.15 to 0.35 (m3). The CX75sr is truly short and sturdy, and it is a powerful force that meets the needs of its customers.

Safe and low noise, absolute city darling!

The tailless design of the CX75sr has caused many people to worry about its safety. In fact, it is worried that it will not "hook" in the operation, resulting in safety hazards. However, the CX75sr is not the case. The weighting material of the Case's tailless type is a denser cast iron, which not only ensures stability but also saves space. The quality of the CX75sr has exceeded 8t, so you don't have to worry about squatting, even if you are at ease.

Without fear of heat, the CX75sr's engine compartment is designed in the form of a duct, pumped sideways, and the engine cooling system, air flow and air duct are redesigned, and the heat dissipation performance will be better than the traditional small digging.

City darling, Case CX75sr

In urban operations, noise pollution has always been a problem for everyone. The CX75sr meets the Tire4 standard to significantly reduce noise levels, allowing customers to concentrate on their work in urban operations without being disturbed.

Mentioned the big excavation in the Case excavator series is the mine overlord, the mine king! Then the CX75sr in the small digging series introduced today is definitely a city darling. "If you want to do something good, you must first sharpen your tools." Choose the Case CX75sr, enjoy driving pleasure, and you will be outstanding in your homework!

The 177-year precipitation brings the courage of Case's uncomfortable face to face various problems and problems, or the domineering side leakage, or small and smart, Case can always meet the full range of needs of customers, and make you the road to prosperity. Add bricks and tiles.