Manufacturing Sector,Manufacturing Software,Industrial Manufacturing Machinery Blog - torinomachinery.com

Data show that the coal industry booms from a high level

Since reaching its peak of 115.35 in September 2004, the ferrous metals mining industry has experienced a gradual decline over the past two years. In the first quarter of this year, the industry sentiment index dropped to a low of 102.88. Although there have been some recent improvements, the sector is no longer experiencing the same level of growth as it did during the boom period in 2004. From January to July, the prosperity index for the ferrous metals mining industry stood at 104.83, marking a decrease of 6.27 points compared to 2005. This represented the largest drop among the 39 industrial sectors, with a decline of 10.19 points from the high level recorded in the same period in 2004. September 2005 marked a turning point for the coal mining industry, which began showing signs of a downturn thereafter. From January to July this year, the coal industry climate index fell by 32 points compared to the same period last year. The main reason behind the decline in both coal and ferrous metals industries is the rising costs and limited ability to pass on price increases. Since the second half of 2005, the gap between sales growth and cost growth has widened significantly. On April 1, the government raised the coal resource tax in several provinces, including Shaanxi, Jiangsu, Heilongjiang, and Jiangxi. Additionally, recent adjustments to electricity, oil prices, railway tariffs, and port fees have further increased production and transportation costs. From January to July, the cost of coal product sales rose by 32% year-on-year, 7.9 percentage points higher than the growth in sales revenue. Similarly, the growth in sales costs for ferrous metals has consistently outpaced sales revenue growth since 2005. Although the gap narrowed slightly in the second half of 2005, it widened again after China raised resource tax rates on iron ore and manganese ore starting January 1, 2006. From January to July, the cost of ferrous metal mining product sales increased by 37.8%, 8.7 percentage points more than the growth in sales revenue. This high cost growth has severely squeezed profitability in both industries. As supply and demand in the coal market gradually balance, a buyer’s market is emerging, and coal prices are not rising. Meanwhile, iron ore prices lack strong support due to declining profits in the downstream steel industry. The ex-factory price index for ferrous metals mining fell by 3.6% in July compared to the same period last year, while the coal industry's ex-factory price index stabilized, increasing by only 2.8% year-on-year. One direct result of these price declines is stagnant productivity growth. In addition, excessive inventory and slow capital turnover are also contributing to the decline in both industries. From January to July, the finished goods inventory for coal and ferrous metals mining reached 72.117 billion yuan and 283.463 billion yuan, respectively, up 44.4% and 34.1% year-on-year. At the same time, accounts receivable for companies increased by 38.4% and 20.7% year-on-year, accelerating by 16.3 and 12.4 percentage points compared to the same period last year. Due to these factors, the profitability of the ferrous metals mining industry has continued to fall, with negative profit growth persisting since 2006. The coal industry has also seen a decline in profit growth, partly due to a higher base in previous years. As macroeconomic control measures take effect, the rapid expansion of energy-intensive industries will be further restricted. National coal supply and demand are expected to stabilize, leading to increased overcapacity pressures and downward pressure on coal prices. However, government efforts to enhance safety, improve environmental standards, and increase recovery rates will likely raise operational costs, leaving the coal industry still under economic pressure.

Hydraulic System

Loader hydraulic system fluid generally has the following components:
1. Power component part: its function is to convert the mechanical energy of the motor or Engine into hydraulic energy, such as various oil pumps.
2. Actuator part: its function is to convert hydraulic energy into machinery, thereby driving the working parts to make linear or rotary motion, such as hydraulic cylinders or hydraulic motors.
3. Control element part: its function is to adjust and control the pressure, flow and flow direction of the liquid flow in the hydraulic system to meet the requirements of the force (torque), speed (speed) and movement direction (circular movement) required by the working parts. Such as various pressure valves, flow valves and reversing valves.
4. Auxiliary components: oil tank, oil pipe, pipe joint, oil filter, accumulator, pressure gauge, radiator, transmission medium, etc. They play an important role in ensuring the reliability and stability of the hydraulic system.
5. Transmission medium: hydraulic oil.
The hydraulic system of the loader generally includes a working hydraulic system, a steering hydraulic system, and some also use a pilot hydraulic system.
The working hydraulic system is generally composed of a Working Pump, a multi-way valve, a boom Cylinder, a Bucket cylinder, and pipelines.
The steering hydraulic system is generally composed of a steering pump, a monostable valve, a priority valve, a steering gear, a flow amplification valve, a steering cylinder, and pipelines.
The pilot hydraulic system generally consists of a pilot pump, a pressure selection valve, a pilot valve, a steering gear (pilot), a steering limit valve, and a pilot line.

SEM 50F, 650 hydraulic system
Liugong loaders ZL50CN, 855N, 856 hydraulic system,
SDLG 956L 952H 953 Carbon Fiber hydraulic system,
XCMG hydraulic systemLW500KL ZL50GN,
Komatsu WA380, WA380-3, WA380-5, WA430-5 hydraulic system
DEGONG loader hydraulic system
Foton Lovol Loader hydraulic system
Lonking 855N loader hydraulic system
XGMA 932 936 956 Loader hydraulic system
Changlin Loader hydraulic system
Shantui SL50W Custom hydraulic system
And we have more.

Hydraulic System,Shantui Loader Gear Pump,Liugong Loader Cylinder,Good Steering Machine

Jinan Union Construction Machinery Co., Ltd. , https://www.tfloaderparts.com