Compared to new cars, used cars are indeed cheap, and the same budget can buy better cars. However, at present, the used car market in China is confusing, and consumers are also very afraid of buying accident vehicles. Deformed car. So how to identify the accident car, which accident car identification methods are there! The first is to look directly at the front of the car and inspect the various parts of the car to see if there is a trace of a collision. This is mainly to check the technical condition of the front and rear bumpers of the body door. This method is particularly simple to use, and is widely used in the automotive maintenance, used car identification industry. The following is the inspection of the eccentric wear of the tires. Because the uneven wear of the tires reflects the incorrect positioning parameters of the vehicle's four wheels, why is this happening? In large part, it is because of the collision of the vehicle, especially the chassis. There have been more violent collisions, including the chassis hitting the flower bed and hitting obstacles on the road, resulting in incorrect positioning of the four wheels and uneven wear of the tires. If you buy an accident car, but the tire is not biased, what does it mean? It means that the degree of collision is lighter, there is no big problem or the quality of the repair is relatively high, and there is no big trace left. There is the need to pay attention to the details, to see the symmetrical asymmetry between the two sides, especially whether the headlamp fog lamps on both sides are the same old and new? The gap between the two sides of the hood is not the same. Is the oldness of the network consistent with other places? You can also walk around the vehicle and look sideways to see if there is chromatic aberration in the paint between the plates to see if there are gold-plated repairs. If the paint has irregular irregularities underneath it, it means painting. There is also the original sealant, which is soft in most cases and can be snagged in with nails. When buying a car, you can also look at the glass and look at the glass on the car. The glass of the accident car is completely replaced, so it must be different from the year of the car. Finally, look at the tank frame has not been repaired, or traces of screws screwed, check whether these places are not accident cars everyone knows. If you still can not fully grasp, it is recommended to find a professional to help you detect.
The final product will be 40%-45% tire oil (fuel oil), carbon black and 35% carbon black, 10% steel and another 5-10% recycled gas (CH4-C4H10). Rubber Pyrolysis Machine,Scrubbers Pyrolysis Plant,Scrubbers Recycle to Energy,Pyrolysis Tyres of Lanning Henan Lanning Technology Co., Ltd , https://www.lanningrecycling.com
The main process is to pyrolyze the tire into oil and gas by directly heating the reactor;
The condenser or cooling tube will cool the gas to a liquid oil with the aid of circulating water;
Then, the remaining gas that cannot be cooled into liquid oil is recycled to the reactor heating system; after the oil and gas is completely discharged, the reactor is stopped to be cooled, and the reactor below 70 degrees is cooled; then the door can be automatically opened and the carbon black can be discharged. .
The capacity of each batch of products ranges from 5 tons to 20 tons.
LN-2200-6000 capacity 5-6 tons
LN-2200-6600 has a capacity of 7-8 tons
LN-2200-8000 has a capacity of 9-10ton
LN-2600-6600 has a capacity of 10-12ton
LN-2600-8000 has a capacity of 12-14ton
LN-2800-6000 capacity is 10-12ton
LN-2800-6600 has a capacity of 12-14 tons
LN-2800-8000 capacity is 15-20ton
If cut into small pieces, it can handle more.
Accident car identification method