Introduction: The daily care of the wood chip dryer machine affects its life and operating quality. The good lubrication of all load bearing belts has a great bearing on the bearing life. The wood chip dryer directly affects the service life and operation of the machine. The rate, therefore, requires that the injected lubricant must be clean and the seal must be good. 1, and all load bearing belt machine good lubrication has a great bearing on the bearing life, wood chip dryer it directly affects the machine's service life and operating rate, thus requiring the injection of lubricant must be clean, the seal must be good, ( 1) Rotate the bearings in the main oiling machine (2) Roller bearings (3) All gears (4) Bearings, and sliding plane activities. Finishing Mill Rolls Finishing Mill Rolls Finishing Mill Rolls,Bainitic Nodular Cast Iron Rolls,High Speed Steel Rolls,Carbides Rolls Shijiazhuang BKDR Metallurgical Science & Technology Co.,Ltd , https://www.bkdrtech.com
2. Always check that newly installed tires are easily loosened.
3, part of each machine works better.
4, pay attention to check the wear of the Wear Parts always pay attention to replace the worn parts.
5, mobile and base aircraft dusting Egypt, other things, wood chip dryer machines can not be broken, when the activities can not move the bearing base, which led to serious accidents.
6, bearing oil temperature is too high, wood chip dryer should immediately stop to check the reasons to eliminate them.
7, rotating gears in operation, if wood chips dryer affect the sound should immediately stop checking and eliminate.
Description: Used for early finishing stand and late finishing stand (Wire mill, steel rod mill, steel bar mill). With a high wear-resistant properties and anti-crack, anti-peeling, anti-prints capacity. These types of roll ensure that the plats surface quality and dimensional accuracy.
Material: Bainitic nodular cast iron , high speed steel, carbides or as per the customer`s requirement.
Barrel Diameter: 700mm maximum
Unit weight: 10mt/pc
Type: Single rolls, double pouring cast rolls.
Casting: Static casting, centrifugal casting
Heat treatment: annealing, normalizing, quenching, and tempering.
Wood chip dryer machine maintenance method