Locking plates engage a keyway in a shaft or adapter sleeve and are attached to the side face of the nut by two bolts secured with locking wire.
A locking plate consists of a plate, two hexagonal head bolts with drilled heads and lock wire to secure them
Spacers are the small parts inserted in-between the two bearings of your skate wheel axles. They take care of the coherence between the two bearings, in order to optimize the matching and synchronization of their rotation. The bearings lean on them when tightened. Locking Spacer,Bearing Locking Spacer,Locking Headset Spacer,Wheel Spacer Locking Ningbo Ritbearing Imp & Exp Co.,Ltd. , http://www.ritbearingchina.com
The most common model is shown on the 3D diagram below (in blue): a floating collar spacer with an axle of 8 mm.
Bayer launches polycarbonate Stella immersion sterilization system
At the 2010 International Medical Device Design and Technology Exhibition held in Shanghai from August 25th to 26th, Bayer MaterialScience presented a series of innovative application products and advanced technologies under the theme of “Create a Better Life with Technologyâ€. Among them, the Yapa polycarbonate Stella soaking and sterilizing system debuted for the first time has high heat resistance, toughness, light stability and fluidity, can withstand higher soaking sterilization temperatures, and greatly shortens the sterilization compared with the use of conventional materials. time.