Bulk feed carriers usually drive long-distance driving, and the driving environment as well as the condition of the road surface and some other accidents are totally unforeseen. If the bulk feed carrier is in such a situation Under the direct driving into the breeding factory, it is relatively easy to cause animal diseases. The current farming is basically intensive. If some of the animals are infected, then there will be a large area of ​​transmission, and the economic losses brought by it are inestimable. Therefore, whenever a bulk feed truck is to enter and leave the breeding factory, it is also necessary to do a disinfection and cleaning work. How do the feed trucks perform disinfection? 1. When the bulk feed carrier needs to enter the breeding factory, it must be certified after it has passed the relevant registration certificate, so that it can effectively avoid the verification of the source of the outbreak. 2. After the bulk feed truck has been registered, it needs to cooperate with the instructions of the relevant personnel to drive the vehicle to the designated disinfection and cleaning area. Then, when the disinfectant is cleaning and disinfecting the vehicle, the time cannot be less than ten minutes. 3. After the feed truck completes the cleaning and disinfection process, the driver also needs to replace the shoes, and then conduct a disinfection work in the disinfection passage. 4. The driver drives the bulk feed carrier into the disinfection tank and disinfects the tires of the vehicle. In the process of disinfection, the vehicle needs to be controlled to move at a speed of five kilometers per hour. Allow the wheel to be completely soaked. 5. After the vehicle has been disinfected in the disinfecting tank, drive the bulk feed carrier to the disinfecting channel to conduct spray disinfection again. 6. After the spray disinfection process is completed, the bulk feed carrier will need to place the vehicle in a quiet place for a quarter of an hour. After waiting for the driver to do a good job of disinfection and replacing the shoes, he can drive into the plant. And it is the production area of ​​feed.
Application:
Parts Carrier Plate specially used for Grinding and polishing of monocrystalline silicon sheet, ceramics, optical glass, crystal, gallium arsenide, sapphire, quartz chips, etc
Xinxiang SKF Machinery Co., Ltd. carrier plate not only matched in domestic grinding machines but also matached in machines made in Germany, Russian, South korean, and Japan.
Sizes: 4B.6B.7B. 9B. 12B. 13B. 16B.20B.22B. Accept other customized sizes.
Parts carrier
Parts Carrier Plate Parts Carrier Plate,Steel Carrier For Grinding,Epoxy Board Carrier,Epoxy Board Thick Carriers Xinxiang SKF machinery Co., Ltd. , https://www.facegrindingmachine.com
How to Disinfect Bulk Feed Carriers