The most obvious increase in productivity is the high fast moving speed (301/min), high cutting feed rate (30m/min) and fast acceleration/deceleration of up to 0.359, which is three times higher than typical machine tools. However, the trajectory processing function plays a crucial role in improving productivity. With a single tool, you can machine a variety of holes, straight holes, tapered holes or shaped holes, etc. The pins can also be similarly turned, and the end faces and grooves can be machined. This reduces the tool change time, reduces the tool inventory and allows you to machine the degree of control, the required acceleration/deceleration and the relevant dimensions, roundness and, without having to transfer to another machine. All of these are considered together with the highest precision required for cylindricity and Other Machine tools. According to data collected by Toshiba Machines Co., Ltd. but not yet disclosed and displayed on the machine, the machine can guarantee that all of these are equal to or better than the values ​​measured for competing products. no doubt. The aircraft is protected by patents. The Nx76 is compact and therefore has a small footprint, allowing quick installation with a one-piece bed and three-point positioning (three days instead of the previous two weeks). At the same time, the NX76's enclosed splash-proof device, the simple chip flow in the bed and the grease lubrication of all the shafts ensure that the machine can meet the environmental protection needs. Recognized potential 5tevens said that the advantages of the trajectory processing function are easy to see. Therefore, Toshiba Machine Co., Ltd. can expect to sell more machine tools with trajectory machining (an optional function) than machines without this function. For those manufacturers who did not initially choose to purchase the machine, they can also re-install the track processing function at a later stage. The advantages of the NX76 are not in the mass production of small appliances. (Finish) Moving Walk,Fuji Moving Walk,Escalator Gie Em Co., Ltd. , http://www.shelevatormotor.com
Analysis and Discussion on a Model Horizontal Production Station