1-Equipped with powerful Yuchai engine
2-FIAT technology gearbox, made in our own factory
3-Hydraulic steering system
4-FOPS canopy or A/C cabin
5-3 points hydraulic hitch for implements
6-More out put valves are available
Drive type
4*4
Overall dimension(L * W * H)
3225*1440*1900
Wheelbase (mm)
1639
Track(front/rear)
1243/960~1460
Track(front/rear) regulating method
Fixed/stepless
Min.Ground clearance(mm)
270
Min.operating weight (kg)
1400
Counterweight (max)(front/rear)
54/124
Gears(forward/reverse/creeper)
8+2/8+8/16+4
Theoretical speed of each gear(forward/reverse)
1.72-26.02/2.25-10.39;1.72-26.02/1.61-24.24;0.37-26.02/0.5-10.78
Engine
Brand
Laidong, Jiangdong, lijia
Engine type
In-line, four-stroke
Intake mode
Natural intake
Number of cylinders
3
Bore
70
Stroke
105
Displacement(L)
1.53
Engine rated power kW@rpm
18.8
Rated speed
Air cleaner type
Dry or wet type
Type of cooling system
Water-cooled
Max. Torque@ revolving speed (rpm)
≥88/1650
Specific fuel consumpti䨶Ga� 5�Pv E 䨶Ga�3Brated conditions (g/kW.h)
≤244
Fuel tank capacity (L)
29
Steering brake system
Type of steering system
Hydraulic/mechanical
Type of steering gear
Cam and roller steering gear/cycloid orbitrol steering gear
Type of braking system
Shoe type
Transmission system
Clutch type
Single-action/double action
Gearbox type
Two-axis mechanical gearbox
Gearbox shift mode
Shift sleeve +sliding gear
Type of central transmission
Spiral bevel gear type
Final transmission mode (front/rear)
Built-in type, single-stage spur gear
Walking system
Frame type
Frameless
Working device
Type of hydraulic suspension system
Open-center, separated type
Type of linkage
Three point rear linkage
Linkage classes
Class 0 or class I
Lift capacity(610mm point))(kN)
5.2
Regulating mode
Positioning control and floating control
Type of PTO shaft
Non-independent type
The number of PTO shaft splines
6 splines/8splines
Outer diameter of PTO shaft spline
φ35/φ38
PTO shaft speed
540/760 or 540/1000
Hydraulic system
Hydraulic output flow (L/min)
26
Feature of Foton 254 Farm Tractor for Sale:
1. The use of a simple floor structure and an external divider is easy for maintenance;
1. The power by luoyang dongfanghong diesel engine, straight cold water, four-stroke engine, torque reserve;
& Adjustable supporting slider, a protection of the ground
& Flexible design, avoid snow blocking of outlet
& Blow the snow to the green belt or roadside, or throw the snow onto truck
& Ideal implements for clearing traffic lanes, sidewalks, yards etc
50Hp Wheeled Tractor,Wheeled Drive Mini Tractor,50Hp Farm Wheeled Tractor,50Hp Wheeled Small Farm Tractor Shandong Gold Dafeng Machinery Co., Ltd , https://www.golddafengharvester.com
(1) IP network packet loss, delay and jitter. This can cause a reduction in the sound quality of the conference call. (2) End-to-end delay and frame loss caused by the jitter buffer. It will cause a large delay in the conference call.
(3) Acoustic echo caused by sound interface. Echo is also an important assessment indicator for the conference call system. 
The relevant content of the voice network quality control technology in the telephone network is completely described in the ITU Recommendations. The discussion here mainly focuses on the impact on the end user's feelings in voice quality. In most cases, the traditional circuit switched telephone and the current IP telephone are mostly the same. . However, IP telephony networks have special factors such as long delays, jitter, and loss. Therefore, a new framework is needed to assess voice quality. This work is being studied in ESTITIPHON (Working Group 5).
1. Echo in the telephone network 2. The most important echo in the telephone network is the echo of the call—it is the delayed own voice channel that the caller has channeled. Various echoes are caused by the recipient's electrical echo or acoustic echo. If the echo of the caller is reflected in 2 words, he will also affect the receiver. This is where the callee hears the voice of two callers - first a large signal, then a weak signal that is delayed for a long time. This is the echo of the receiver. 
(1) Hybrid echo mixing circuits are used for 2/4 wire conversion and are also common in analog conference call bridges, as shown in Figure 6-4. Among them, Zref is used to match the characteristic impedance of the telephone conference line in order to suppress the echo of the speech, so that the talker is hardly hearing his voice in his receiver. 
In fact, the characteristic impedance of a two-wire line can never be exactly matched, so a part of the input signal will be fed back to the output signal. This spurious signal is mixed echo. On the one hand, it will cause the signal to cycle between the two amplifiers. If the delay is about 20ms, it will cause a "church effect." In order to avoid the instability of the network, it is at least 6 dB to reduce the signal of the four-wire path. On the other hand, the Zref mismatched conference call will feed back all input signals on the network, and the other party's caller will hear her own voice after a round trip time.
In many countries, the transmission network consists entirely of four-wire lines. The two-wire and four-wire conversions only occur where the local exchange links analog telephones. There is no delay because the switch echoes back to the phone, so there is no impact. On the other hand, the echo generated at one end of the telephone is immediately noticed through the network back to the other end, and the round-trip time is about 50 ms.
(1) Acoustic echo Acoustic echo refers to the feedback of part of the sound signal to the same side of the receiver. The common “hands-free phone†is a kind of amplified phone with acoustic echo cancellation, and the “conference phone†is a kind of amplified phone without acoustic echo cancellation. The common conference phones include Polycom's extended, standard, soundstation2, Octopus conference phone, Meeteasy, Konftel, and sound network.
A typical acoustic echo is a spurious signal of about 10-15 dB or less compared to a person speaking with a microphone or using a conference call coupler device, similar to a hybrid echo. This multiple of acoustic echo will not cause people's attention if its delay is below 29ms; if it is 40ms, the conference room at the other end of the line will sound like the other party is talking in the well; if the round trip time exceeds 40ms, the situation will be worse.
A simple way to suppress acoustic noise is to use a headset, but if you use appropriate equipment, the power of the parasitic echo can be controlled to less than 45 dB of the talker signal, even with a speakerphone. ITU Recommendation G.168 gives some recommended indicators for typical echo path testing.
Echo cancellers usually cannot eliminate acoustic echoes and electrical echoes at the same time because the path of acoustic echoes varies widely, so it is difficult to find a dynamic adaptation to the synthesized echo. For ITU's special echo cancellers, the performance of G.168 may not be enough. The new word has a new suggestion that G.168 has taken effect, and some have already been implemented by some manufacturers. This suggestion includes some useful content, such as the ability to stop echo cancellation when a high-speed modem's phase-reversal tone is detected. The typical attenuation values ​​for acoustic echo in current teleconference devices are: 10-15 dB for speakerphones; 35-40 dB for hands-free or high quality handsets. The conference call coupler, the audio processor can well eliminate the echo and howling of the conference call, ensuring the clarity of the voice quality of the conference call. The system is stable.
2. The safety frame is optional;
3. The single-acting or double-acting clutch is optional;
4. The various gear configurations, such as 8+2, 8+8, and 16+4 are optional, and the velocity distribution is reasonable to meet different operating needs;
5. The synchronized shuttle shift is optional, and the operation is easy, flexible and reliable;
6. The operations of hydraulic steering, the mandrel cylinder front drive axle are easy and flexible.
2. Use 4 x (3 + 1) transmission (12 forward, four reverse), convenient operation, high work efficiency;
3. Double speed power output, speed is 540/1000 or 540/720, two sets of hydraulic output interface, can form a complete set of various agricultural machinery, adapt to many condition of operation;
4. Adopting full hydraulic steering, double-acting clutch, flexible operation of portable.
The relationship between voice processing technology and sound quality in conference call
Compared to traditional conference call bridges, controlling echo and delay when carrying voice over IP networks is a key technology for Voip. The media path for an IP phone call can be represented by Figure 6-1, which does not include the PSTN or ISDN terminals. When an ISDN phone interacts through the gateway, the situation is slightly duplicated, as shown in Figure 6-2. When the gateway interface is connected to an analog network, the user-to-network interface requires only two lines (input and output signals share a pair of lines) in most cases. In this case, a four-wire/second-line hybrid circuit is required, as shown in Figure 6-3. Show. In the VOIP system, the factors causing the deterioration of voice quality are: