The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.
The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.
Judge good or bad PVC Edge Banding For Cabinet,Pvc Edge Banding,Banding For Cabinet,T Shape Pvc Edge Banding For Kitchen Cabinet Henan Shunbang Chemical Industry CO.,Ltd , https://www.spvcresin.com
On January 1, 2009, the fuel tax reform program was formally implemented. The various advantages and disadvantages surrounding the fuel tax reform have also become the focus of increasing controversy among car consumers. According to a survey released by Sina.com, the majority of consumers have understood or approved opinions on the government's fuel tax levy. Among them, nearly 70% of consumers believe that under the current taxation mechanism, they do not care about “after taxâ€. Increased vehicle costs. The most controversial groups are concentrated in the “highest frequency of car†commercial vehicle user groups.
It is worth mentioning that the owners of light diesel commercial vehicles such as light trucks and pick-up trucks were clearly divided into two groups in this debate and became the “most contradictory groupâ€. The reason for this is that the fuel tax reform follows the guiding ideology of “saving money and opening up more moneyâ€, but the domestic commercial vehicle usage rate is generally relatively high, and it is unlikely that it will “be less openâ€, so domestic diesel commercials such as pickup trucks are used commercially. The “profit and loss†of car owners after “tax reform†is difficult to determine.
"Equilibrium" becomes the new standard of profit and loss
Raising the fuel consumption tax is a clear signal to the society that China can no longer maintain a pattern of low oil prices, low oil taxes, high fuel consumption, and high oil dependence, but should encourage energy conservation and environmental protection. For high fuel consumption groups, it is necessary to adjust consumer behavior through increasing tax burden. For the automotive industry, raising the tax burden on fuel consumption is conducive to the development and application of energy-saving and environmentally friendly vehicles. So, for commercial vehicle users, how can we get good fuel tax reform program?
Mr. Jin from Zhejiang calculated accounts for the owners of diesel commercial vehicles. Mr. Jin owns a Baodian pickup truck produced by Jiangling Motors. The average number of kilometers traveled per year is about 60,000 kilometers, and the annual cost of road maintenance, road and bridge fees, etc. saved after the “tax reform†is approximately RMB 3,000. After January 1, 2009, on the basis of the original oil price, a diesel fuel tax of 0.7 yuan per litre would be required. Assuming that the fuel consumption of a certain vehicle is X per hundred kilometers, there is an equation of 0.7*X*60000/100=3000. Therefore, it is not difficult to find that X is about 7.14L. In other words, only diesel owners with a fuel consumption of less than 7.14 litres per 100 kilometers will be able to benefit from this tax reform. After the “tax reformâ€, the industry also called the standard fuel consumption of 7.14 L per 100 kilometers as the “equilibrium point of fuel tax hedge†as one of the criteria for judging the cost-effectiveness of diesel commercial vehicles.
According to Mr. Jin’s introduction, the actual fuel consumption per 100 kilometers of his collection is about 6.5L, which is just below the “equilibrium point of fuel tax protectionâ€. That is to say, there is no need to deliberately reduce the usage of pickup trucks, and the “tax reform†policy will not Increase its car costs. Therefore, even though the "tax reform" program was once heated up, Mr. Kim could not hesitate and settle into the "tax."
"Lifetime cost-effectiveness" replaces "lower price"
According to industry analysts, in the long run, the official implementation of the fuel tax reform plan will have a positive effect on the commercial vehicle market. After the “tax reformâ€, domestic diesel commercial vehicle consumers will pay more attention to the cost of use when purchasing a car. This will undoubtedly directly promote the improvement of diesel commercial vehicle production enterprises, thereby prompting the entire diesel commercial vehicle industry to blindly pursue the “expensive†and extensive The stage of development pursues the development stage of “lifetime cost-effectiveness†and accelerates the upgrading of domestic diesel commercial vehicle technology.
In this regard, Mr. Jin admitted frankly: “Afterwards, when many of my friends were purchasing pickup trucks, the price was undoubtedly the most important factor. There were not many considerations in terms of fuel economy and environmental protection, but now we have to consider the issue of cost. Buying a low-end car that burns oil like drinking water is not as good as buying a car with a higher cost-effectiveness and lower cost. It saves money and saves you.â€
On the issue of how to buy a commercial vehicle, the reporter consulted with the manager of diesel commercial vehicle dealer Huang. Manager Huang introduced: “In fact, domestic diesel technology has been improved to the present day, and it has improved qualitatively, like JMC (JMC ) Such a brand has a foreign joint venture and cooperation background, and the history of building a car is not short. This kind of diesel vehicle produced by the company is not only good in respect of vehicle performance but also cost of use. Furthermore, compared to imported cars, domestic Diesel commercial vehicles can maintain their prices at a reasonable level while guaranteeing performance. This is undoubtedly the best choice for domestic diesel commercial vehicle owners at this stage."
1. Look at the hue and surface roughness of the edge banding strip. The color of the surface of a good edge banding strip is also very important. Whether the color is close to the customized product and is gorgeous. If the surface is very rough and there are pull marks, the quality is definitely not much better. This is the surface quality of the edge banding strip. It has nothing to do with the quality of the inner material of the edge banding, mainly the production process of the edge banding factory and the production technical skills of the employees. A good edge banding strip is: the surface must be smooth, no blistering or seldom bubbling, no drawing or few drawing, moderate gloss, not too shiny or too matte (unless there are special requirements).
2. Check the flatness of the surface and bottom of the edge banding and whether the thickness is uniform, otherwise it will cause the joint between the edge band and the board, the glue line is too eye-catching or the gap between the board and the edge band is too large, which will affect the overall beauty. Details determine success or failure, and often a small detail problem may bring an embarrassing situation where the overall effect is not good.
3. Whether the edge trimming is whitish, whether the surface of the bent edge strip is severely whitish, and whether the ground color of the trimming strip is close to the surface color of the board in question. PVC Edge Banding strips are mainly made of PVC and Calcium Carbonate plus additives. If the calcium carbonate content is too high, whitening of the edge banding and bending will occur, which proves that the quality of such products is not good.
4. Whether the strength is okay and whether there is elasticity. High strength means good wear resistance, and the corresponding quality is better. Too high strength also means increased processing difficulty. Low elasticity means low wear resistance and low aging resistance. In addition, according to actual production needs, manual trimming is generally required, and soft spots can be made appropriately, and the automatic edge banding machine can make hard points appropriately.
5. Whether the adhesive is applied evenly and whether it is easy to fall off during use.
6. Smell whether the PVC edge banding strips taste or not. Products produced with good quality raw materials generally have a small taste. If the taste is too large, it means that the quality of the raw materials used in production is relatively poor.
Post-tax fuel diesel commercial vehicle profit and loss difficult to define